MT02G Metallic Gloss Mocha Latte *SPECIAL OFFER 20% OFF* *DISCONTINUED*

£95.90/span> £112.80
Inc. VAT
Disclaimer
Discontinued products are sold as-is and do not come with any warranty. You agree to our Terms & Conditions when purchasing.

With a collection of many fancy colours, TeckWrap offers you this series of matte metallic vinyl wrap, which gives your vehicle a subtle look of metallic steel with a flat finish. As a proud supplier, TeckWrap has plenty of film selections that have good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstall. The better thing is, these vinyl wraps from TeckWrap are all in high quality but reasonable and affordable prices.

1.52M X 18M


Specifications

Conformable and reliable Renolit polymeric material. Suitable for full car wrapping (or any other smooth or curved surface).

The thickness of film: 0.12mm
The thickness of film with release liner: 0.28mm

Type of film: Pressure sensitive high-grade polymeric vinyl film with air release channels
Colours: Matte coal black, Matte mocha latte, Matte electric blue, Matte cornflower blue, Matte beige linen

Series: 190 series
Glue: Henkel solvent based adhesive
Release liner: White silicone-coated paper with a double-sided polyethylene coating
Storing period: 3 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Indoor life: 5 years when followed rules of application and use
Outdoor life: 3 years when followed rules of application and use
Application:from +17°С to +25°С, usage from -55°С to +65°С
Post heating: 100 Celcius
Surface gloss (CD): 14.5% (Test method: ASTM D523-99 60 d.angle)

Elongation/Break MD:206.8 / CD:196.4 (Test method: ASTM D882-02)

Tensile Strength: MD:29.5 / CD:24.8 N/mm2 - Speed 200mm/min (Test method: ASTM D882-02)

Dimensional Stability: 2% - Oven/10'*70C(MD) (Test method: ASTM D1204-02)

Surface Tension: 34 dynes/cm (Test method: ASTM D2578-04a, 24 hours after production)

Install tips:
Application: from +17°C to +25°C, usage from -55°C to +65°C
Tools: soft squeegee with buffer
Conformability: flat and moderate curves. Deep recesses with inlays
Directional: yes
Overlap width: 4-5mm

Package: Roll width 152 cm, length 18 m, weight 13 kg

Important note: The images, colours, and finishes on screen are approximate. For the real representation of the product always check the colour swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of colour may occur. The film may scratch during the application, or during a day in and out use. The scratching of the film is not covered by the warranty.


Close