CHM12-HD Mirror Chrome Electric Pink£132.00/span>
Semi-conformable material designed for partial wrapping on smooth or medium curved surfaces. Concave and convex surfaces with difficult angles should be wrapped in pieces with 3-5mm overlaps. Comes with a selection of 12 reflective colours.
Application: vehicle and motorcycle graphics, vehicle personalization
The thickness of the film: 0.19mm
The thickness of film with release liner: 0.35mm
Type of film: Hybrid vinyl film (silver coating) with air release channels
Series: 180 series
Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) and plain white backing
Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Indoor life: 4 years when followed rules of application and use
Outdoor life: 1-2 years when followed rules of application and use. Durability depends on the surface and climate zone.
Application temperature: from +17°С to +25°С, usage from -30°С to +30°С
Dimensional stability: shrinkage less than 0,20%
Plastification: between 23%-31%
Package: Roll width 152 cm, length 18 m, weight 13 kg
Important note: The images, colours, and finishes on the screen are approximate. For the real representation of the product always check the colour swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of colour may occur. One needs to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, too strong heating. The film may scratch during the application, or during a day in and out use. The scratching of the film is not covered by a warranty.
Сaution: Before purchasing and using, a customer shall determine the suitability of the product for its intended use. One should have high installation skills in the wrapping of chrome and metalized films. If you don't have the proper experience we suggest choosing another finish. The current film has a limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend laminating chrome films. We recommend using a steam vacuum or IRR heater for installation. The dry application only.
Recommendation: To avoid adhesive residue on the substrate during uninstall we recommend pulling “snap" chrome film off at a low angle. Do not heat chrome film during uninstall