ECH22 Matte Metallic Cherry Blossom Pink

£120.00/span>
Inc. VAT

With a collection of 15 fancy colours, TeckWrap offers you this series of matte metallic vinyl wrap with the eggshell finish, which gives your vehicle a subtle look of metallic steel with a flat finish. As a proud supplier, TeckWrap has plenty of film selections that have good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstall. The better thing is, these vinyl wraps from TeckWrap are all in high quality but reasonable and affordable prices.

Specifications

Conformable and reliable multilayered polymeric material with stable colour pigments. Suitable for full car wrapping (or any other smooth or curved surface).

The thickness of the film: 0.16mm
The thickness of film with release liner: 0.32mm
Type of film: High grade polymeric calendared vinyl film with air release channels
Colours: Satin Pearl White, Gunsmoke Grey, Charcoal Grey, Royal Bronze, Nutmeg Brown, Persian Blue, Salmon Red, Navy Black, Hornet, Bond Gold, Oxford Blue, Forest Green, Metal Silver, Dark Platinum

Series: 190 series
Adhesive: Henkel solvent-based acrylic adhesive
Release liner: White silicone-coated paper with double-sided polyethylene coating
Storing period: 3 years if stored in +10°C to +20°C for optimal quality, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Indoor life: 5 years when followed rules of application and use
Outdoor life: 3 years when followed rules of application and use
Dimensional stability: shrinkage less than 0,20%
Plastification: between 25%-32%
Breaking Strength: 28.7 N/10mm (Average)
Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)
Test Method: ASTM D3330/D3330-04
Post heating:
Light Ageing in UV Exposure:
over 110 Celcius
Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005,
Test result: 4-5
Exposure cycle: ASTM D4329-13 cycle A,
Lamp type: UVA-3408h UV at (60±2.5)°C BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)°C BPT, Exposure duration: 48h

Install tips:
Application: from +17°C to +25°C, usage from -55°C to +65°C
Tools: soft squeegee with buffer
Conformability: flat and moderate curves. Deep recesses with inlays
Directional: yes
Overlap width: 4-5mm

Package: Roll width 152 cm, length 18 m, weight 13 kg

Important note: The images, colours, and finishes on screen are approximate. For the real representation of the product always check the colour swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of colour may occur. The film may scratch during the application, or during a day in and out use. The scratching of the film is not covered by the warranty.

Close