GAL16-S Gloss Aluminium Dark Navy Blue *DISCONTINUED*

£118.80/span>
Inc. VAT
Disclaimer
Discontinued products are sold as-is and do not come with any warranty. You agree to our Terms & Conditions when purchasing.

With a collection fabulous colors, TeckWrap offers you this series of gloss aluminum vinyl wrap, which gives your vehicle a super distinctive-looking finish. As a proud supplier, TeckWrap has plenty of film selections that have good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstall. The better thing is, these vinyl wraps from TeckWrap are all in high quality but reasonable and affordable prices.

Specifications

  • It is an advanced polymeric multi-layered film with silver coating and air release channels that help to achieve smooth application and perfect finish.
  • The thickness of film: 0.12mm
    The thickness of film with release liner: 0.28mm
  • Variety of colours: GAL01-S True Blood, GAL02-S Blue gem, GAL04-S Deep pink, GAL05-S Mermaid green, GAL06-S Paprika orange, GAL07-S Leaf green, GAL08-S Amber gold, GAL10 Storm Grey, GAL11-S Silver Mist, GAL12-S Yellow-green, GAL13-S Olympic blue
  • Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)
  • The adhesive is a solvent polyacrylate. TeckWrap high-tech adhesive is save for car paint and has low or moderate initial tack ensuring easy installation.
  • Release liner: Kraft white silicone-coated; paper with a double-sided polyethylene coating. We care even about the back paper we use. Quality paper saves adhesive and material during storage and transportation. Storing period (shelf life) is 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place.
  • Average indoor life is 4 years, and outdoor life is 3 years when followed rules of application and usage. Mentioned periods are enough for a car wrapping film. An adhesive usually becomes permanent on the post-heated surfaces after 3 years, so we recommend unwrapping a car after this period to avoid cleaning of excessive adhesive residue.
  • Recommended room temperature for application is from +17°С to +25°С. Service temperature is from -55°С to +65°С. TeckWrap car wrapping film is durable to temperature extremes, but we request customers to take care of it as if it’s original car paint. Don’t leave your wrapped car under direct sunlight for a long period to prolong period of exploitation and ensure dimensional stability. Shrinkage is less than 3% for matte films, 4% for gloss films.
  • The application method is the standard one, suitable for polymeric calendared and hybrid films. General recommendations are thorough cleaning, no overstretching and post-heating to recommended temperatures - 100℃ for flat surfaces and 120℃ for curves and overlaps. We recommend a steam vacuum or IRR heater for installation.
  • Cure time is 24 hours above 15℃, but we recommend keeping the vehicle at room temperature for 48 hours to ensure maximum adhesive activation.
  • Aftercare: PH neutral products. Avoid hot wax or solvents.
  • Directional: no
  • Tools: soft squeegee with buffer

Important note: The images, colours, and finishes on screen are approximate. For the real representation of the product always check the colour swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of colour may occur. The film may scratch during the application, or during a day in and out use. The scratching of the film is not covered by the warranty.


Close