RD09 Colour Shift Vinyl Matte Metallic Chartreuse Purple Ruby£132.00/span>
The colors of Aurora Borealis in a stunning veil dance of the Northern Lights.
As a proud supplier, TeckWrap has plenty of film selections that have good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstall. The better thing is, these vinyl wraps from TeckWrap are all in high quality but reasonable and affordable price.
Conformable material with stable colour pigments. Suitable for full car wrapping (or any other smooth or curved surface).
The thickness of film: 0.16mm
The thickness of film with release liner: 0.32mm
Type of film: High grade polymeric multilayered calendared vinyl film with air release channels
Colours: Winered Nebula, Ibiza Sunset, Iris Purple Gem, Peacock Green, Northern Aurora, Rainbow Vortex
Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)
Series: 190 series
Adhesive: Solvent polyacrylate
Adhesive performance properties: (1mil adhesive on 1mil material, bounded to stainless steel panel) 180°Peel (PSTC-101), 20-minute bond – 2.2 lb/inch, 24-hour bond – 3.5 lb/inch
Release liner: Kraft white silicone-coated, paper with a double-sided polyethylene coating
Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Avg. indoor life: 4 years when followed rules of application and usage
Avg. outdoor life: 3 years when followed rules of application and use
Application: from +17°С to +25°С, usage from -55°С to +65°С
Dimensional stability: shrinkage less than 3%(matte), 4% (glossy)
Plastification: between 27%-35%
Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)
Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5
Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching. Post heating
Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps
Cure time: 24 hours above 10℃
Aftercare: PH neutral, Avoid wax or solvents
Tools: soft squeegees with buffers
Important note: The images, colours, and finishes on screen are approximate. For the real representation of the product always check the colour swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of colour may occur. The film may scratch during the application, or during a day in and out use. The scratching of the film is not covered by the warranty.